Aion Electronics CERULEAN Talimatlar Kılavuzu - Sayfa 10
Müzik Ekipmanları Aion Electronics CERULEAN için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Aion Electronics CERULEAN 10 sayfaları. Amp overdrive
LICENSE & USAGE
No direct support is offered for these projects beyond the provided documentation. It's assumed
that you have at least some experience building pedals before starting one of these. Replacements and
refunds cannotbe offered unless it can be shown that the circuit or documentation are in error.
All of these circuits have been tested in good faith in their base configurations. However, not all the
modifications or variations have necessarily been tested. These are offered only as suggestions based
on the experience and opinions of others.
Projects may be used for commercial endeavors in any quantity unless specifically noted. No
attribution is necessary, though a link back is always greatly appreciated. The only usage restrictions
are that (1) you cannot resell the PCB as part of a kit without prior arrangement, and (2) you cannot
"goop" the circuit, scratch off the screenprint, or otherwise obfuscate the circuit to disguise its source.
(In other words: you don't have to go out of your way to advertise the fact that you use these PCBs, but
please don't go out of your way to hide it. The guitar effects industry needs more transparency, not less!)
DOCUMENT REVISIONS
2.0.0 (2022-11-25)
Complete circuit redesign.
• Combined soft & hard clipping into one switch.
• Added new "Mode" toggle to go between V1 and V2 Bluesbreaker variants.
• Added new internal DIP switch to select between three gain ranges.
• Removed JFET boost stage.
1.1.0 (2020-05-18)
• Changed value of C10 for consistency.
• Slight layout change, relocating D1 to footswitch board.
• Added C11 MLCC capacitor to footswitch board.
1.0.1 (2018-08-14)
Corrected parts list to specify LEDs for D6 and D7. Minor formatting adjustments.
1.0.0 (2018-07-04)
Initial release.
CERULEAN AMP OVERDRIVE
10