Dobinsons BU59-3661 Kurulum Kılavuzu - Sayfa 7

Otomobil Aksesuarları Dobinsons BU59-3661 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dobinsons BU59-3661 10 sayfaları. Bullbar

28. Plug the wiring clips in for the fog lights and

parker/indicator lights. Test all lights and

adjust the position of the fog lights if

required.

29. Using the fastening hardware supplied fit the

under bar protection kit.

30. Trim the mud guard liners level with the

bottom of the under protection kit and secure

with cable ties.

31. Check over all items removed during

installation.

32. IMPORTANT NOTES: It is important to inform

the customer that headlight adjustment may

also be required due to the change in ride

height. It is also important to inform the

customer that there will be a change in

vehicle handling characteristics. It is also

important to note that due to their nature fog

lights are required to provide a yellow light to

allow clear fog vision. For this reason

Dobinsons bullbars utilise a Halogen bulb.

Halogen bulbs generate a considerable

amount of heat to achieve the yellow colour

and this causes the air inside the fog light lens

to expand and contract. For this reason the

fog light assembly cannot be sealed and has a

small breather on the back. In some cases this

may cause condensation to form inside the

Dobinsons Springs and Suspension

fog light. The customer may choose to seal

the lens of the fog light but must not seal the

rear breather.