Aiper Orca 800 Mate Kullanıcı Kılavuzu - Sayfa 5

Yüzme Havuzu Vakumu Aiper Orca 800 Mate için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aiper Orca 800 Mate 16 sayfaları.

Important Precautions

1. Read the manual carefully, and use the cleaner according to the manual.

We are not liable for any losses or injuries caused by improper use.

2. To avoid any accidents/damages, please ﬁx the power supply unit 11.5ft

(3.5m) away from the swimming pool by using the included safety rope,

in case it falls into the water and result in potential danger.

3. To prevent severe damages to the cleaner, never power on the unit when

it is outside of the swimming pool.

4. The power cord must be connected to an appropriate earthed socket

and the power connector must be plugged in tightly.

5. Hold the top handle when putting the cleaner into water or lifting out

of the water, do not pull the cable. Before powering on, make sure to

empty the trapped air inside the cleaner (no more air bubbles come

from the cleaner and the cleaner is fully submersed on the pool floor).

6. Before powering on, make sure the ﬁlter tray is assembled in position

and the cord is fully released to avoid any winding, which could affect

the cleaner's performance or cause damages.

7. Please clean and wash the ﬁlter tray every time after use.

8. The cleaner should be stored in a cool and ventilated place, away from

direct sunlight when it's not in use.

9. The power supply unit should be placed at a shaded area during working.

To avoid overheating and potential damages of components, never cover

the power supply unit during working.

10. Only authorized after-sales service personnels can open the cleaner's

power supply unit and motor assembly, otherwise the warranty will

be invalidated.

11. Do not use the cleaner beyond the working environment/conditions

stated in this manual.

12. Make sure the PH value of the pool water is between 7.0~7.4.

13. This machine is to clean the pool only not for other purposes.

14. Do not use the cleaner immediately after spraying the pool chemicals

and do not use the cleaner as a dosing machine, which will damage

and corrode the parts.