AKONA Exuma Jumper Kullanıcı El Kitabı - Sayfa 8

Spor & Kamp; Açık Hava AKONA Exuma Jumper için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AKONA Exuma Jumper 16 sayfaları. Water trampoline

Sayfayı Yazdır

O W N E R ' S M A N U A L

A S S E M B L Y I N S T R U C T I O N S

Do not exceed 2.5 PSI (0,17 bar) if filling with compressed air. Excessive pressure can

cause the tube to rupture with potentially damaging force to eyes, ears, skin and limbs.

Use of an air compressor over-inflation can rupture the tube beyond repair, thus voiding

It is normal for the air pressure within the tube to fluctuate depending on air and

water temperatures. It may be necessary to increase or decrease the air pressure

in your product accordingly. To avoid damage on extremely hot days it maybe

necessary to check and release the air pressure from your product throughout the

day. A fully inflated product on warm land will lose some of its pressure when placed in

cold water.

ASSEMBLE THE TRAMPOLINE FRAME

Lay the trampoline frame sections in a circle with the tapered ends next to the non-

tapered ends, and the spring holes facing up.

Slip a vinyl sleeve on each section before connecting them. Slide the ends of the

sections together to form a complete circle.

Inserting from the top of the frame through to the bottom, install a bolt through each

intersection. Add washer and nut to bolt. Tighten firmly. Slide the vinyl sleeves over

each intersection to protect inflatable tube from abrasion.

ATTACH THE FRAME TO THE TUBE

With another person helping, place the trampoline frame onto the inflated tube.

C A U T I O N !

DO NOT OVER-INFLATE.

the warranty.