Fleck 5600SXT Kurulum Kılavuzu - Sayfa 12
Su Sebili Fleck 5600SXT için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fleck 5600SXT 14 sayfaları.
Ayrıca Fleck 5600SXT için: Kurulum Talimatları Kılavuzu (19 sayfalar), Programlama (3 sayfalar)
Sayfayı Yazdır
7) The display should now show
shown in Figure 12-A. This indicates the Number
of Tanks is one. Do not change this value and
press the REGEN button to advance to
the next setting
9) The display should now show
cates the Hardness is 20 gpg. i
doWn button to change this value to the
total hardness level of your water listed on
page 2/calculated on page 4
REGEN button as shown in Figure 12-C
11) The display should now show
cates the Safety Factor is 10%. This means the
system will leave 10% of the softening capacity
for the day before regeneration.
button to change the value to 15%
the REGEN button as shown in Figure 12-E
PAGE 12
nT / ---1
as
F I G u R e 12 - a
H / 20
. This indi-
Use the UP or
and press the
F I G u R e 12 - C
SF / 10
. This indi-
Use the UP
and press
F I G u R e 12 - e
QualityWaterForLess.com
8) The display should now show
indicates the Unit Capacity is 32,000 grains.
Use the UP or doWn button to change
i
this value to the one listed on page 2/calcu-
lated on pages 4 and 5
button as shown in Figure 12-B
10) The display should now show
in Figure 12-D. This indicates that the Reserve
Selection is Safety Factor percentage. Do not
change this value and press the REGEN button
to advance to the next setting
12) The display should now show
shown in Figure 12-F. This indicates the Day
Override is 14 days; the system will regenerate
in 14 days if the meter has not measured water
consumption to have reached the calculated
capacity. Do not change this value and press the
REGEN button
c / 32.0
. This
and press the REGEN
F I G u R e 12 - B
rS / SF
as shown
F I G u R e 12 - d
do / 14
as
F I G u R e 12 - F
Help: 888-426-5001