fleetfinder GOLD Kullanıcı Kılavuzu - Sayfa 16
GPS fleetfinder GOLD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. fleetfinder GOLD 19 sayfaları.
Sayfayı YazdırFurther explanation of the LED functionality is described below:
Power indicator:
When the unit is powered on using main power, the led will be permanently
on. W hen t he m ain power i s cut, the unit will s witch to backup battery
mode, the led will flash until the backup battery runs out of power.
RED LED
Troubleshooting:
Check that you have a valid 12V or 24V source connected to the device.
The Red wire should be connected to the positive terminal, and the Black
wire should be connected to the Ground terminal. If there is power applied
to these wires, please check the inline fuse.
GSM / GPRS indicator:
The yellow led will flash w hen t he device i s connected t o the tracking
server with a valid GPRS connection. It will stay on continually when it is
in sms mode only, or when the GSM is present but invalid APN, username
and password have been set.
Troubleshooting:
If t he y ellow light i s not o n at a ll, p lease ensure the GSM antenna is
connected, and that the sim card is properly inserted, with the gold terminals
facing the circuit board. Please ensure the terminals are clean, and the sim
card clips into place appropriately. If this fails, please put the sim card into a
phone, and make sure that it is registered, and that you are able to send a
YELLOW LED
message from the phone. Please ensure the sim pin on the sim card has
been disabled (this can be done in the security settings in a mobile phone).
If t he y ellow light i s on, but not flashing, p lease ensure that y ou have the
correct APN, u sername and password set for the network. The APN is
usually different for each network provider, and can be found by calling the
telecommunications provider, some telecommunications providers require a
username and password to be declared, please ensure that you have these
details. The APN, username and password can be set only from the primary
defined phone number (please refer to the Users Manual for setting primary
identity). The primary phone needs to send commands for setting the APN,
username and password (these commands can be found in the command list
in the users manual)
GPS indicator:
This led will stay on when there is a valid GPS fix. When there is no GPS
reception, the led will not be lit.
GREEN LED
Troubleshooting:
Please ensure that the GPS antenna (gold connector) is connected, and
that it is mounted in a suitable spot with clear view of the sky. The vehicle
must be outside to be able to get a GPS fix.
P24
12.0 SCREEN FUNCTIONS
fleetfinder GOLD Touch Screen Functions
12.1 Speed Dial Button
This option allows you to quickly and easily access the Speed
Dial phone numbers that are registered (max of 4 numbers per
device). The Speed Dial numbers can only be set up from the
server by authorised personnel.
12.2 Navigation Button
The Navigation Button on the device allows for Turn by Turn
Navigation on the device using the integrated map.
12.3 Communication Button
The Communication Button is your access to communicate
using the standard mobile phone features.
P25