ETA Systems ETA-ECM20M Manuel - Sayfa 16
AC Güç Dağıtımı ETA Systems ETA-ECM20M için çevrimiçi göz atın veya pdf Manuel indirin. ETA Systems ETA-ECM20M 20 sayfaları. Electrical housing for eta-ecm20/eta-ecm20m, electrical control module 20a power conditioner
Ayrıca ETA Systems ETA-ECM20M için: Bilgi Sayfası (4 sayfalar)
Sayfayı YazdırElectrical Housing for ETA-ECM20/ETA-ECM20M
ETA-ECM20, ETA-ECM20M SPECIFICATIONS
General
Type
Power Requirements
Power Consumption
RoHS Compliant
Safety Listings
Panel
Switched Outlets
Spike & Surge Suppression
Manual Override
Extreme Voltage Shutdown
Connectors
Fuse Protection
DCV Remote Trigger
Remote Trigger
Status Signals
Indicators
AC Mains Interconnect
Technical Data
Current Rating
Operating Voltage
High Voltage Surge Protection
Spike & Surge Suppression
Low Voltage Protection
Spike Protection Modes
Minimum Spike Clamping Voltage
Maximum Spike Clamping Voltage
Maximum Spike Clamping Response Time
Spike Clamping Voltage @ 100A
Maximum surge current
Energy Rating @ 2ms
Noise Attenuation EMI/RFI Sequencer
Temperature Range
Humidity Range
Mechanical
Chassis Finish
Mounting
Dimensions
Unit Weight
ETA-RACEWY6
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 16 –
Specifications are subject to change without notice.
Power Conditioner Suppressor Module
120V 60Hz
.5W
Yes
MET (UL 1449 Code)
Two, 20A
H-N, N-G, H-G
Slide switch
ETA-ECM20M Model only, (EVS) Below 102V or
Above 132V AC Line (When Used With ETA-ECS6RM)
5 Position Phoenix Euro Block Style
20A Slow Blow
5–24VDC
SPST Contact
Output for Voltage and Current Data
(ETA-ECM20M model only)
Incoming AC, Active, AC Fault
(ETA-ECM20M model only)
Screw terminal block
15 amps
102-132 VAC
Trigger at 133 VAC, 1ms typically (When Used With
ETA-ECS6RM) (ETA-ECM20M model only)
H-N, N-G, H-G
Trigger 101 VAC, 1ms typically (When Used With
ETA-ECS6RM) (ETA-ECM20M model only)
Circuitry on incoming AC Mains.
460 VRMS @ 3,000 amps
6000V
1 nanosecond
1250Vp for 20µs
6,500 amps
600 Joules
10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
(ETA-ECM20M model only)
5º to 35º C
5% to 95% R.H.
Black
#8 5/16" self tapping screws
3.0" H x 8.5" L x 3.5" W (7.6cm x 21.6 cm x 8.9cm)
ETA-ECM20=1.25 lbs(.68 kg),
ETA-ECM20M=1.75lbs (.80kg)
etasys.com