DocuPen DocuPen RC800 Series Kullanım Kılavuzu - Sayfa 4

Aksesuarlar DocuPen DocuPen RC800 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DocuPen DocuPen RC800 Series 16 sayfaları. Portable scanner

Sayfayı Yazdır

DocuPen RC800 Features

Color Mode

Battery

Memory

High Resolution

Standard Resolution

Photocolor Mode

Docucolor Mode

Mono Mode

Scan Speed

The DocuPen Scanner has two control buttons on top. On the left-hand side of the

DocuPen you can see eight LEDs indicating the scan settings and on the right you see

the Battery and External memory card cover and the USB port. By pressing the

control buttons you will be able select the desired color mode and scan resolution. The

LEDs on the left-hand side of the scanner will indicate the mode that you have select-

ed.

Power On/Rez (Resolution) Button

Press the Power On/Rez button once to turn the DocuPen on. The DocuPen

will turn itself on in default or last used configuration. The corresponding LEDs

will be on. For details on the various configurations please go to section Scan

Settings - LEDs Indicators, page 19.

Press the Power ON/Rez button again to select between Standard Resolution

and Hi Resolution (Hi Rez) setting.There are two Standard Rez and two Hi

Rez settings which can be set via the Pen Configurator Dialog explained in

Section Scan Settings, p.20. The Resolution LEDs will turn on/off accordingly.

After the scan is completed the DocuPen will save the data into memory and

turn itself off automatically. For safety purposes you can also turn the

DocuPen off manually by pressing and holding the Power ON/Rez button for 5

seconds.

Color Mode Button

Press the Color Mode button to select desired Color mode.There are three

color modes available: Mono, Docucolor and Photocolor . The Color Mode

LEDs will turn on/off accordingly. When both desired Color mode and Rez

setting are selected, you can start gliding the DocuPen down your document.

Note:

YOU MUST INSTALL THE DRIVERS BEFORE STARTING TO WORK WITH

DocuPen Operation Manual 6

Power On/Resolution

Battery/ External memory

Card Cover

THE DOCUPEN!

Driver and Software Installation

Before starting to work with the DocuPen RC800 you must install the necessary driv-

ers. Please insert the DocuPen RC800 Installation CD in your CD-drive and follow the

on-screen instructions.

The DocuPen interfaces with your computer via a proprietary Twain driver. After instal-

USB Connector

lation, the DocuPen driver is made available to all Windows Twain-compatible applica-

tions, such as PaperPort, Windows Imaging, etc. This ensures that the scanned

images can be downloaded to your computer.

DocuPen Driver Platform Requirements: Before you install the DocuPen PenTwain

driver, make sure that your computer meets the following minimum system require-

ments:

Microsoft Windows 2000/NT/ME/XP

CD-ROM for driver installation

After inserting the Installation CD in your CD drive The DocuPen RC800 Installer con-

trol window will appear. (See above)

By clicking on the corresponding button you will install the PenTwain driver (obligato-

ry), the DocuPen Application (recommended) and the PaperPort software (recom-

mended). The Docupen Application will allow you to view the images from your

DocuPen without using any additional graphics software.

ScanSoft's PaperPort is one of the leading Document Management Software packages

on the market and works seamlessly with our DocuPen. Although you can use any

Twain compatible graphics software we recommend PaperPort due to its document

editing capabilities

DocuPen Operation Manual 7