Clinton 6361 Kullanıcı Kılavuzu - Sayfa 5

Tıbbi Ekipman Clinton 6361 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Clinton 6361 8 sayfaları. Power series, bariatric, blood drawing chairs

Sayfayı Yazdır

LEVELING

For optimum performance and patient safety, all Clinton Power

Series, Bariatric, Blood Drawing Chairs should be on a clean,

level non-slip surface. Once the chair is in the desired location,

level it by adjusting the four leveling feet on the base. Turn the

feet counter clockwise to decrease the height and clockwise to

increase the height of the leg. Make certain that the chair is level

in all directions and that it does not wobble or rock.

OPERATION

CLEAN BEFORE USING

It is important to thoroughly clean the chair according to facility standards before it is put into service.

See cleaning suggestions on page 6.

The dual columns on Clinton Power Series, Bariatric, Blood Drawing Chairs are designed to

self-adjust to level the load. It is important to return the chair to its lowest position after

each use to reset the relationship between the columns. Failure to do so could result in the chair

being unresponsive to a lift command. If this happens, lower the chair to its lowest position to reset

the column relationship.

FOOT CONTROLLER

Clinton Power Series, Bariatric, Blood Drawing Chairs are

controlled with a foot-operated, wired controller.

1. Press the minus (–) side of the controller with slight foot

pressure for Down motion.

2. Press the plus (+) side of the controller with slight foot

pressure for Up motion.

The chair may be stopped and used at any position.

PLEASE READ

IMPORTANT OPERATING INSTRUCTIONS