3M 6000 Kullanıcı Talimatları - Sayfa 6

Solunum Ürünleri 3M 6000 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. 3M 6000 15 sayfaları. Half facepiece respirator
Ayrıca 3M 6000 için: Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Talimatları (16 sayfalar), Teknik Veri Sayfası (5 sayfalar), Talimat Sayfası (2 sayfalar), Talimat Sayfası (8 sayfalar), Kullanıcı Talimatları (2 sayfalar)

Sayfayı Yazdır

3M™ Filters, Adapters, Retainers

Number

****AAD

Description

501

07054

Filter Retainer for Filters 5N11 and 5P71

502

Filter Adapter for Filters 2000 Series and 7093/7093C

603

Filter Adapter for Filters 5N11, 5P71 with Filter Retainer 501

2071

Particulate Filter, P95

2076HF

Particulate Filter, P95, hydrogen fluoride, with nuisance level acid gas relief

2078

Particulate Filter, P95, 3M recommended ozone protection

2091

07000

Particulate Filter, P100

2291

Advanced Particulate Filter, P100

2096

Particulate Filter, P100, with nuisance level acid gas relief

2296

Advanced Particulate Filter, P100, with nuisance level acid gas relief

2097

07184

Particulate Filter, P100, 3M recommended for ozone protection

2297

Advanced Particulate Filter, P100, 3M recommended for ozone protection

5N11

Particulate Filter, N95

5P71

07194

Particulate Filter, P95

7093

Particulate Filter, P100

7093C

37173

Particulate Filter, P100, hydrogen fluoride, with nuisance level organic vapor/acid gas relief

**** AAD part numbers are catalog numbers only. NIOSH approved as PSD part numbers.

3M recommended for relief against nuisance levels of acid gas and/or organic vapors. Nuisance level refers to concentrations not exceeding

OSHA PEL or applicable exposure limits, whichever is lower. Do not use for respiratory protection against acid gas/organic vapors.

3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower.

NOTE: Not NIOSH approved for use against ozone.

In Brazil, the 3M™ Filter 5935BR can be used with the Filter Adaptor 603 and the Filter Retainer 501 on the 3M™ Half Facepiece 6000 Series.

ASSEMBLY INSTRUCTIONS

NOTE: Make certain 3M™ Inhalation Port Gaskets 6895 are in place on the facepiece bayonet connectors before installing filters, cartridges or

breathing tubes.

3M™ Cartridge 6000 Series, Filter 7093 and Cartridge/Filter 7093C

1. Align the cartridge notch with the small solid bayonet lug on facepiece and push together.

2. Turn cartridge clockwise to stop (1/4 turn).

3. Repeat with second cartridge (Fig. 1).

3M™ Filters 2000 Series

1. Align opening of filter with filter attachment on facepiece.

2. Turn filter clockwise until it is firmly seated and cannot be further turned.

3. Repeat for second filter (Fig. 2).

, with nuisance level organic vapor/acid gas relief

, with nuisance level organic vapor relief

Fig. 1

6864_w6000cart2_turn.eps

4/12/04 K&K

(English)