Etac Molift Smart 150 Kullanıcı Kılavuzu - Sayfa 17
Kaldırma Sistemleri Etac Molift Smart 150 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Etac Molift Smart 150 20 sayfaları.
Ayrıca Etac Molift Smart 150 için: Kullanıcı Kılavuzu (19 sayfalar)
Sayfayı Yazdır
Service
Molift Smart 150 has a LED on the battery holder
indicating if the lifter needs service. The LED gives
a green light when the lifter is ready for use.
The electronics logs how much the lifter is being
used, and the load it is used with. After a given
time of usage there will be given a signal that the
lifter needs service to the service LED. The LED will
first give a yellow light, then red. Take contact with
your local service representative and order serv-
ice. If there is a sound together with the light, it
means the lifter needs service immediately.
Service lamp
No light
Green
Yellow
Red
Red + sound
Service consists of replacing the lifting motor and
check/replacement of worn or damaged parts.
Service and repair should be performed by au-
thorized personnel only.
Fill in and sign a copy of the checklist on next page.
The owner is responsible to ensure proper logging
and written verification of each service or repair.
A list of spare parts is avalable on request.
BM09201 Molift SMART 150 English - Rev E 10/2012
Battery
indicator
Service
lampe
Electrical
emergency
lowering
Status
Power save
Ready for use
Order service, lifter still
works
Perform service
Perform service imme-
diately
Page 17 of 20