DODODUCK Q1 Kullanım Kılavuzu - Sayfa 3

Ölçüm Cihazları DODODUCK Q1 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DODODUCK Q1 4 sayfaları. 16gb

NORMAL RECORDING

1. To turn off voice activated recording, connect the adapter and click on pause (M button)

until the light blinks, alternating from red to blue. During pause mode, long press M key

for 3 seconds, The indicator light will flash red lights several times quickly.

2. You will know that you are in normal recording mode when you turn on the Q1 recorder.

The light will blink red 5 times.

NOTE: During the recording process, do not connect to the computer, otherwise the recording

ﬁles may become corrupted.

Check the recording status: While recording, long-press + and hold it. A red light will flash once

to indicate that normal recording is on, and a blue light will flash once while recording in voice

activated mode.

ADVANCED PARAMETERS

You can customize your recorder settings by connecting the Q1 to your computer and accessing

the "factory.txt" file. Once you open the file you will find that you can change the following

parameters:

TYP: save recording files in WAV or mp3 formats.

VOR: Voice activated recording sensitivity. You can change this setting if your voice activated

function is being activated by small noises or in the contrary, your recordings show incomplete

recordings because voice activation was not triggered at the right time.

BIT Rate: This will determine the quality and size of the recording file.

GAIN: To configure the microphone sensitivity. If the recording is distorted, you should lower the

sensitivity. If your recordings are very low in volume, you should increase the sensitivity.

SECTION: Maximum recording file in minutes.

DATE and TIME parameters. They set up the correct date and time for your recorder. They are

usually changed via the time.exe app, however if you cannot execute this app because you

have a Mac, you can change them manually. Please make sure you update them with your

current date and time.

RESTORING FACTORY SETTINGS

The Q1 recorder acts like a mini computer in many ways. If for some reason, the recorder

becomes locked or frozen, you can reset it by connecting it to your Windows computer and

reformatting the recorder. After connecting to the computer, click My Computer, find the mobile

drive letter and right-click the mouse, select format, and then select quick format. In this way, the

factory settings can be restored and most of the problems will be eliminated. Please make sure

to back up your recordings and the time.exe app, because they will be deleted once you

reformat the recorder.