DOEPFER LMK2+/USB Kullanıcı Kılavuzu - Sayfa 5

Elektronik Klavye DOEPFER LMK2+/USB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DOEPFER LMK2+/USB 12 sayfaları. Midi master keyboard usb version

Sayfayı Yazdır

7. OPERATION OF THE KEYBOARD

7.1 SWITCHING THE KEYBOARD ON

When the keyboard is switched ON – i.e. if the external power supply is connected or a USB connection is

established – a message regarding the software version will appear for several seconds on the display (for

example "201" for version 2.01) and the LEDs will flicker for several seconds. After that the keyboard will go into

the PLAY-mode and all settings made before turning the keyboard off previously are automatically called up

(non volatile memory for the last settings). The PLAY-mode is indicated by the letters "PLA" on the display.

7.2 MENU STRUCTURE

There are 8 menus available which are selected by means of the 8 MENU-buttons. A menu is selected by

pressing the corresponding MENU-button. The LEDs above the MENU-buttons indicate which menu is active at

any given time. Menus are exited simply by pressing a different MENU-button. Some menus are exited by

pressing the same MENU-button a second time or by pressing one of the keys on the keyboard. If none of the

LEDs is illuminated the keyboard is in PLAY-mode. PLAY-mode is always indicated by the absence of

illuminated LEDs and the letters "PLA" on the display. In some menus both the controls and certain keys on the

keyboard are utilized to set parameters.

The following menus correspond to the MENU-buttons (from left to right):

Upper row

PRESET

PROGRAM CHANGE/BANK/REALTIME

SPLIT

CHANNEL

In the next few paragraphs the function of each menu is briefly discussed. A detailed description of each menu

can be found in the next section after that.

1 PRESET

The LMK2+ has 17 presets. Each preset contains data about all 4 keyboard zones and their corresponding

keyboard ranges, Midi-channels, transpositions, allocation and activation of the controllers and the velocity-

response curve. Preset 1 is the user definded preset that is called up when turning on the keyboard and that is

automatically altered whenever the user changes any zone parameter.

Presets 2-17 are 16 factory presets which are fixed and cannot be altered by the user. The PRESET-menu

serves to select the user preset (1) or one of the the 16 factory presets.

2 PROGRAM CHANGE/BANK/REAL TIME

This menu, in conjunction with the keys of the keyboard, is used to send Midi-program change and Midi-bank

select messages (Midi controllers #0 and #32) to the devices connected to the LMK2+. Also, in this menu the

Midi-real time messages START, STOP and CONTINUE can be sent. Certain keys of the keyboard are used for

this purpose.

3 SPLIT

The LMK2+ can transmit on up to 4 Midi-channels simultaneously. Each Midi-channel is assigned a part of the

keyboard, a so-called keyboard zone or split range. Overlaps between the zones are possible (i.e. some keys

are used by more than one zone). The SPLIT-menu is used to define the keyboard zones, i.e. the

lowest/highest key for each of the 4 zones.

4 CHANNEL

In this menu the Midi-channels for the 4 keyboard zones are set.

5 TRANSPOSE

In this menu the transpositions of the 4 keyboard zones are set.

6 DYNAMIC

In this menu the velocity-response curves for the 4 keyboard zones are set. 16 different velocity tables are

available.

LMK2+/USB User's Guide Page 5

Lower row

TRANSPOSE

DYNAMIC

CONTROLLERS

PANIC