DOEPFER A-107 Manuel - Sayfa 12

Su Filtrasyon Sistemleri DOEPFER A-107 için çevrimiçi göz atın veya pdf Manuel indirin. DOEPFER A-107 18 sayfaları. System a - 100, multitype morphing filter

Sayfayı Yazdır

A-107

Multitype Morphing Filter

normally one of the frequency peaks shown in the

response curves is lifted up (see chapter 7).

For the filters 01 ... 18 (see chapter 7) the resonance

can be adjusted right up to self-oscillation, in which

case the filter will behave like a sine wave oscillator.

The filters 19...36 do not support self-oscillation.

Even the effect of resonance and self-oscillation is

treated more detailed in the manuals of other A-100

filters (e.g. A-121, A-123, A-124, A-108, A-105/122).

$ Amp.

This group of controls serves to define the filter ampli-

tude or level. It contains a manual amplitude control

and two amplitude CV inputs (one with attenuator,

one without attenuator). This control group is assigned

to the final VCA (nothing but an exponential VCA that

is connected to the filter output).

The filter output level is manually adjusted with the

manual amplitude control. To modulate the amplitude

by an external voltage (e.g. ADSR, LFO, sequencer)

the control voltage has to be patched into one of the

two amplitude control inputs. One input is equipped

with an attenuator to control the resonance modulation

amount of the corresponding input.

System A - 100

% Audio Out

Filter output % sends out the filtered and level control-

led audio signal.

doepfer