DOEPFER A-100 Series Manuel - Sayfa 13

Kontrolör DOEPFER A-100 Series için çevrimiçi göz atın veya pdf Manuel indirin. DOEPFER A-100 Series 16 sayfaları. Analog modular system, connecting the breakout module to the main module
Ayrıca DOEPFER A-100 Series için: Kullanım Talimatları Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Montaj ve Kablolama Kılavuzu (6 sayfalar), Manuel (8 sayfalar), Manuel (8 sayfalar), Manuel (6 sayfalar), Bağlantı (8 sayfalar)

Sayfayı Yazdır

DOEPFER

5. User Examples

Standard Modulation Patch

Suitable control voltage sources are LFO (A-145 as shown

in the example, A-146, A-147, A-143-3), random voltage (A-

118, A-149-1), envelopes (A-140, A-141, A-142, A-143-1, A-

143-2), S&H (A-148, A-152), sequencer (A-155), theremin

(A-178) or ribbon controller (A-198).

Even for the "enveloped BBD" patch with the envelope

follower of the A-119 as control voltage the A-188-2 can be

used (described in the user's manual of the A-188-1 on

page 13).

System A-100

The feedback is processed by an external voltage controlled

polarizer (A-133) to obtain voltage controlled feedback.

Instead of the polarizer even a VCA can be used. But with a

VCA only positive or negative feedback is possible. Any of

the single outputs of the A-188-2 can be used for the

feedback loop. Even other sound processing modules (e.g.

filters, frequency shifter, wave multiplier, spring reverb,

phaser) can be used for voltage controlled feedback

processing.

BBD Module A-188-2

Voltage Controlled Feedback