Doepke Dupline DSM 4E Kullanım Talimatları Kılavuzu - Sayfa 7
Röleler Doepke Dupline DSM 4E için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Doepke Dupline DSM 4E 8 sayfaları. 4-way relay output with semiconductor inputs
Sayfayı Yazdır
Doepke
Incandescent lamps
Fluorescent lamps with el. ballast
Gas discharge lamps
Capacitor for compensation
Energy-saving lamps, conv.
Energy-saving lamps, el. ballast
Operating Voltage
Rated operating voltage
Current input (all relays on)
Terminals
Housing
General technical data
Ambient temperature
Encl. protection type / standards IEC60669, EN55022 / EN50081-1 and EN55024
Order number, description 09 501 106, Four-way relay output DSM 4E
a. The data relate to a minimum service life of 25000 switching cycles and the connection
requirements as per IEC 60069.
b. Min. 5000 switching cycles
c. These data are largely dependent upon the manufacturer. In case of doubt, please refer!
12. Guarantee
All professionally installed, unaltered devices are covered by warranty during the statu-
tory guarantee period from the day of purchase by the end user. The guarantee is not
applicable to damage incurred during transport or caused by short-circuit or overloading.
In the event of defects in workmanship or material, which are discovered within the guar-
antee period, the company will provide a replacement free of charge. The guarantee will
be rendered null and void if the device is opened or tampered with.
HV-halogen lamps
Fluorescent lamps
ballast
Ripple voltage
Type Strain-relief clamps
Contact area
Torque
Type Distribution installation housing to DIN 43880 for
Dimensions 72 x 85 x 58 (B x H x T in mm) / 4 modules
Material Polycarbonate
Atm. humidity max. 85% (exposure to dew not permissible)
Min.
max. 1000 W (70µF), 1250 W (100µF
max. 70 µF (100µF
c
21.5 VDC
15 mA
0.4 mm ∅
rail-mounting to DIN EN 50022
-10°C
/ EN50082-1
3931172/02/05/D
Typ.
3000 W
2500 W
2400 W
b
)
1250 W
24 VDC
26.5 VDC
18 mA
100 mV
2.5 mm²
0.6 Nm
Max.
600 W
b
)
300 W
20 mA
pp
+45°C
7