CLIPS TECH NB-KO Kullanıcı Kılavuzu - Sayfa 6

Kulaklıklar CLIPS TECH NB-KO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CLIPS TECH NB-KO 15 sayfaları. Bluetooth stereo headset

￭ Power ON (Voice Prompt: Say "Power on")

Push the Power/Call button approximately 2 seconds using the Power-On/Off button,

then the LED indicator will turn from blue to red to turn power ON. If it does have the

paired device near the product, it will try to connect automatically. If the connection is

completed, the LED indicator will alternately turn from red to blue to show it is ready to use.

If the pairing is interrupted, the red and blue LED will alternately keep blinking.

￭ Power OFF (Voice Prompt: Say "Power off")

Push the Power/Call button approximately 3 seconds from the power-on, then LED

indicator will turn to red after blue and turn off the LED indicator to Power OFF.

NOTE: If the signal is lost between device and product, due to such things as turning off the

smartphone or disconnection of the pairing after power is turned on, the red LED indicator

will turn on, indicating the problem, and automatically shut off the product after a brief delay.

NOTE: The operation might be different for your smartphone or device as interactions

may vary depending on the specification of the products.

￭Receiving a Call (Voice Prompt: Say "Connecting")

When a call comes to in to your smartphone, the product starts vibrating*

and the LED indicator blinks blue. Push Power/Call button once quickly.

￭Receiving other call

Press Power/Call button quickly to answer or press Power/Call button more

than 1 second

Please speak clearly and directly into the microphone. If the sound you talk

seems too low to the opponent.

✻ NOTE: Vibration CANNOT be turned OFF.

Power ON/OFF

Make a call using smartphones