Clipsal 560884 Kullanıcı Kılavuzu - Sayfa 11

Matris Anahtarlayıcı Clipsal 560884 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Clipsal 560884 20 sayfaları. Multi room audio matrix switcher

Sayfayı Yazdır

6.1

Replacing the Fuse

The fuse is located next to the AC power socket on the rear of the Matrix

Switcher (as shown in Figure 5). To replace the fuse:

1) Switch the mains off at the power point. Unplug the power cord at

both ends (the power point and Matrix Switcher).

2) Insert your finger against the right edge of the socket and lift the

fuse compartment outwards.

3) Use a small instrument such as a screwdriver or pen. Insert the

instrument through the hole on the right hand side of the fuse

compartment, and push the fuse out.

4) Insert a replacement 3.15 A Fast Blow 20 × 5 mm fuse.

5) Close the fuse compartment by pushing it inwards.

Figure 5 – Replacing the fuse

User's Guide