Cannondale 120858 Kullanıcı El Kitabı Eki - Sayfa 8

Bisiklet Aksesuarları Cannondale 120858 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı Eki indirin. Cannondale 120858 17 sayfaları. Cannondale bicycle accessories user manual

Sayfayı Yazdır

1. Installation

KF362/BBQ

Figure 4.

Installation

1. Make sure the seat post, binder, and seat

tube are clean. Use a dry towel.

2. Apply small amount of seat post gel to seat

post surface and reinstall the post into the

seat tube.

4. Tighten the seat binder with a torque

DO NOT EXCEED MAXIMUM

wrench.

SPECIFIED TORQUE 6.8Nm.

5. Check tightening torques of the saddle to

seat post clamp bolts. Too much torque

may fail the bolts. Too little torque will

result in movement which leads to fatigue

and bolt failure.

seat post / binder

WARNING

TO AVOID SEAT POST OR FRAME

DAMAGE:

•

seatpost

instructions

• Use a torque wrench to tighten.

• Use only seat post gel to lubricate.

• Do not use solvents, or chemical spray

cleaners to clean.

• Never force a seat post into the seat

tube.

• After any crash, fall, or impact, remove

and inspect the seat post for damage

(e.G., Cracks, scratches, scrapes, gouges,

splintering). If damage is found, do not

ride it; discard it. Replace the seat post

with a new one.

YOU CAN BE

PARALYZED OR KILLED IF YOUR IGNORE

THESE WARNINGS.

KF115/

manufacturer's

SEVERELY INJURED,