Dog Care PC01 SSS - Sayfa 6

Evcil Hayvan Bakım Ürünü Dog Care PC01 için çevrimiçi göz atın veya pdf SSS indirin. Dog Care PC01 8 sayfaları. Smart pet clipper

19. How to clean the blades?

Excess hair and dirt may accumulate between the blades. After removing the blades with the clipper

off, you can and clean the hair away with the cleaning brush included in the box or a worn out toothbrush.

Do not use water to clean the blades.

20. How to oil the blades?

a. Oil the blades before, during, and after each use. The oil icon

will flash when your blades need lubrication.

b. To oil the blades, turn on the clipper in Quiet mode, and place a few drops of oil on the front and

each side of the blades. Leave the clipper running for a couple of seconds for the oil to penetrate

evenly between the blades. Then turn off the clipper and wipe excess oil off blades with a soft dry

cloth.

c. Use clippers-dedicated oil. Do not use hair oil, grease, or any oil mixed with kerosene or other

solvents at any time.

21. How to cool down the blades?

a. If the blades are not adequately lubricated, the blade temperature will rise rapidly. Please oil the

blades as needed.

b. Your clipper intelligently monitors the blade temperature. Check the current blade temperature on

the screen regularly.

c. If the temperature gets too high, you can switch off the clipper and place it in a cool and

ventilated place for 5 minutes. If there are replacement blades at hand, you can also replace the

blades to continue clipping.

22. When and how to replace the blades

on your clipper screen