Dog Care TC01 Manuel - Sayfa 11

Evcil Hayvan Bakım Ürünü Dog Care TC01 için çevrimiçi göz atın veya pdf Manuel indirin. Dog Care TC01 17 sayfaları. Dog training collar
Ayrıca Dog Care TC01 için: Kullanıcı Kılavuzu (17 sayfalar)

Sayfayı Yazdır

1. Remote Control

VI. Match the Remote Control to the Receiver:

*You may skip this step because the set is already paired by factory setting.

Press and hold Channel Switch / Match Button for 5 secs. The

Receiver will vibrate and beep which indicates the matching is completed.

You will see "1" (or subsequent number) in the Channel Display when the

match is successful.

'beeps'

'vibrates'

Adding multiple Receivers:

After confirming that the receiver is turned off, hold the ON/OFF button

of receiver for 5 seconds until the LED indicator Light on receiver flashes

in green.Press and hold Channel Switch /Match Button for 5 secs

(repeat steps

2.1 and 2.2).

number of the new Receiver. Note: Connect only 1 Receiver at a time, do

not connect all simultaneously, or the Remote will match all Receivers into a

single channel.

'beeps'

'vibrates'

Removing all Matched Receivers:

Press and hold Static Level Regulator Activation Button and Beep Button

simultaneously for 5 secs. The Channel Display will default to "0". Note:

Make sure all Receivers you want to remove have power and in the effective

range, so that Receivers could receive the remove command.

VII. Training Tips

1. Reward your dog with food will usually help to achieve the best

result.

2. Do not use the device on dogs aged below 6-month, old, pregnant,

easily frightened, aggressive, in heat, old, and dogs not in best of health.

After confirming that the receiver is turned off,

hold the ON/OFF button of receiver for 5 seconds until

the LED indicator Light on receiver flashes in green.

The Channel Display will show the subsequent