Dog Runner Tracks Kullanıcı Kılavuzu - Sayfa 8

Evcil Hayvan Bakım Ürünü Dog Runner Tracks için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dog Runner Tracks 18 sayfaları.

Sayfayı Yazdır
Step 4.
Step 5.
Step 6.
7
C
f
a
F
D
G
c
E
1. Pull out the wire and release wire through
console welding tube assembly (C).
2. Tighten computer welding tube assembly
(C) with Hex screw (a), washer (f) by hex
Wrench (F) as left figure showing.
1. Connect computer cable (D) with cable port
from computer welding tube assembly (C).
2. Align the computer screw column with the
computer tube hole ( C ).
3. Use cross wrench tool (G) to tighten the
Truss phillips self tapping screw (c) .
4. Attach the safety key ( E ) into computer
(D).
1. Finish assembly.
2. Turn on the power to check the machine if
can start functionally, if not, to check again if
the cable connection between computer ( C )
and computer welding assembly (D) if
connect properly.