Dogtra 1800NC Series Kullanıcı El Kitabı - Sayfa 14

Evcil Hayvan Bakım Ürünü Dogtra 1800NC Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dogtra 1800NC Series 20 sayfaları. Remote controlled dog training collars
Ayrıca Dogtra 1800NC Series için: Ayarlar Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Dogtra 1800NC Series Kullanıcı El Kitabı

1. Charging the Batteries

CHARGING THE BATTERIES

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on

page 22.

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger,

plug into a cigarette lighter. (Use a 230-

volt European charger for Europe.) When

properly plugged in, all indicator lights

should glow red.

The receiver automatically turns off when

you insert the charging cable into the

battery charging receptacle on the receiver.

3. After charging, cover the battery charging

receptacles with the rubber plugs on the

transmitter and receiver.

4. The battery is fully charged with a 14-hour

charge. The lights will stay red during the

charging process. They DO NOT turn

green when fully charged. Charging the

batteries for more than 14 hours at one time

will not extend battery life.

TESTING YOUR

1. Turn the collar on by pressing the button on

the back side of the collar receiver. The

indicator light will come on for a moment

then blink once every two seconds, showing

that the collar is ready to use. (If the

indicator light is red, the batteries need to be

charged.) Place the test light on the contact

points of receiver and hold it there.

TESTING

COLLAR