ASEPT Hovicon International 921020 Hızlı Başlangıç Kılavuzu - Sayfa 4

Dağıtıcı ASEPT Hovicon International 921020 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ASEPT Hovicon International 921020 6 sayfaları.

Sayfayı Yazdır
EN
DISASSEMBLING DISPENSER
Turn, as demonstrated in fi g. 1, the spout bolt upright (do not turn!) and bend by means of
a buckling movement of the hands the both parts of the dispenser at the V-formed notch
apart.
As fi g. 2 shows, both parts of the dispenser can be easily drawn apart afterwards.
ASSEMBLING DISPENSER
Put after cleaning the green fl apper valve back before assembling the spout.
For the assembling you need to perform the actions in reverse order. You need to watch
carefully, that the V-formed notch is directly opposite to the V-formed bulge. By pressing
strongly both parts will fall together and your dispenser is ready for use again.
CLEANING INSTRUCTION
1. The dispenser should regularly be cleaned.
2. Cleaning should be done by rinsing the dispenser with tepid water and not hot water.
3. The use of aromatic detergents is to be avoided.
4. The dispenser taken apart for cleaning should be reassembled in the correct sequence.
5. Please take care that the green fl apper valve is not washed away during rinsing.
6. Sharp objects or a screwdriver may never be put into the dispenser.
7. Do not clean the dispenser in the dishwasher.
8. After cleaning and before assembling of the dispenser you have to grease the piston
body lightly with non-acid vaseline or edible oil.
Do not clean the dispenser in the dishwasher.