Akrobat PRIMUS FLAT Kurulum ve Kullanım Kılavuzu - Sayfa 6

Spor & Kamp; Açık Hava Akrobat PRIMUS FLAT için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Akrobat PRIMUS FLAT 17 sayfaları. Trampoline 17 x 10 ft
Ayrıca Akrobat PRIMUS FLAT için: Kurulum ve Kullanım Kılavuzu (10 sayfalar)

Sayfayı Yazdır

3. ASSEMBLY AND INSTALLATION

We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch points and

sharp points during assembly. Do not apply excessive force during assembly that will cause damage to the product.

TOOLS: You will need a cross-head screwdriver for the retaining wall PVC panels.

Assembling the frame

Lay the frame sections (Part A) into a circle

with the spring holes facing upwards. Push

all sections together until all are fully mated

together.

Note: On the long sides, the frame will appear to bow outwards - this is by design. When the springs are attached the frame will

pull inwards, but always have a slide outward bow.

Important note: all trampoline sizes are approximate and can be up to +/- 2,5 cm / 0,8'' different to those that

we publish.

Fitting the mat and installing the springs

Lay the mat flat inside the frame. Make sure the logo is facing upwards. In order to make the installation of the

jumping mat easier, locate the four rings in the 12, 3, 6 and 9 o'clock position directly opposite each other and

attach four springs on these locations first. Then continue by attaching springs to every eighth ring, followed by

every fourth and so on until all springs are attached.

At first, it may look like the mat won't fit, it will

however stretch to the correct size when you

finish attaching all springs.

Important: Be sure all spring hooks

are well attached to the frame.