Aseptico AEU-40 Endopex V Kullanım ve Bakım Talimat Kılavuzu - Sayfa 6
Tıbbi Ekipman Aseptico AEU-40 Endopex V için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimat Kılavuzu indirin. Aseptico AEU-40 Endopex V 12 sayfaları. Vector based root apex locator
Sayfayı Yazdır
SETTING UP THE UNIT:
1. Unpack the unit and verify that it carries the proper certifica-
tion markings.
2. Open the battery door on the back of the unit using a Phillips
head screwdriver. Install the enclosed 9V battery (for approx.
5 hours of use). The unit will accept three 9V batteries,
resulting in battery life of approximately 15 continuous oper-
ating hours. Close the battery door and secure with screw.
NOTE: The blinking "target indication is set to the "APEX"
indication at the factory. This setting can be changed upward
by adjustment through the set access opening in the back of
the unit. This does not change the performance of the unit
as programmed based on collected clinical data. It does pro-
vide a means to accommodate a preference for a different
"target" indication from the canal.
3. Connect the Cable Assembly to the connector jack on the
side of the unit.
4. Connect one lip probe to the gray receptacle jack on the
cable assembly.
5. Connect one Autoclavable E-ZHook
the white receptacle jack on the cable assembly.
Illustration 3
Endopex Set Up
OPERATION:
After the unit has been set up and you have made yourself
familiar with the operation functions, you are ready for opera-
tion as follows:
4.
TM
file clip assembly to
Illustration 4
EZ Hook connect to file