Cymbol G3 Series Hızlı Kılavuz - Sayfa 10
Güvenlik Kamerası Cymbol G3 Series için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Cymbol G3 Series 13 sayfaları. Network transmitter
Ayrıca Cymbol G3 Series için: Hızlı Kılavuz (16 sayfalar), Hızlı Kılavuz (13 sayfalar), Hızlı Kılavuz (12 sayfalar)
Sayfayı YazdırWhen accessing the Network Camera for the first time, the
"Admin Password" dialog appears. Enter your admin name and
password, set by the administrator.
Note: If the password is lost, the Network Camera must
be reset to the factory default settings.
See "3.6 Resetting to the Factory Default Settings".
3.6 Resetting to the factory default settings
To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
web page or use the Reset button on the network camera, as described below:
•
Using the Reset Button
Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset button.
1.
Switch off the Network Camera by disconnecting the power adapter.
2.
Press and hold the Reset button with a straightened paperclip while reconnecting the power.
3.
Keep the Reset button pressed during about 2 seconds.
4.
Release the Reset button.
5.
The network camera resets to factory defaults and restarts after completing the factory
reset.
Caution: When performing a Factory Reset, you will lose any settings you have saved.
(Default IP 192.168.30.220)
3.7 More Information
For more information, please see the Network Camera User Guide, which is available on the CD
included in this package.
10