Cymbol G3 Series Hızlı Kılavuz - Sayfa 4

Güvenlik Kamerası Cymbol G3 Series için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Cymbol G3 Series 12 sayfaları. Network transmitter
Ayrıca Cymbol G3 Series için: Hızlı Kılavuz (13 sayfalar), Hızlı Kılavuz (16 sayfalar), Hızlı Kılavuz (13 sayfalar)

Sayfayı Yazdır

Function

Power adaptor

connector

Network

connector(PoE)

8-pin I/O terminal

Audio In/Out

Video In/Out

2. Installation

For the operation of the Network Transmitter, it is necessary to connect a network cable for

data transmission, power connection from supplied power adapter and connect a general

analog camera. Depending on operation methods, it is possible to connect an alarm cable

or audio cable additionally. For its fixation on different locations, please consult with an

installer.

• Network Connection

The Network Transmitter supports the operation through the network. Therefore, it is

necessary to connect a standard RJ-45 cable to it. Generally a cross-over cable is used for

directly connection to PC.

• IP Assignment

When the Network Transmitter is first connected to the network it has no IP address. So, it

is necessary to allocate an IP address to the device with the "SmartManager" utility on the

CD. The factory default IP is "192.168.30.220".

Connect the Network Camera / device to the network and power up.

Start SmartManager utility (All Programs>SmartManager>SmartManager), the main

window will be displayed, after a short while any network devices connected to the

network will be displayed in the list.

Connects the supplied power adapter or an external

power supply 12V DC or 24V AC, max. 5W.

RJ-45 port compatible with 10/100Mbps, which have a

PoE function.

Connects RS485, alarm input and output.

Connects the port to the microphone and speaker, which

have an amplifier function.

Connects the video input and output.

Description