DogWatch The Bark Collar BT-7 Kullanıcı El Kitabı - Sayfa 12

Evcil Hayvan Bakım Ürünü DogWatch The Bark Collar BT-7 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DogWatch The Bark Collar BT-7 16 sayfaları. No-bark trainer
Ayrıca DogWatch The Bark Collar BT-7 için: Kullanıcı El Kitabı (16 sayfalar)

DogWatch The Bark Collar BT-7 Kullanıcı El Kitabı

TESTING THE BARKCOLLAR

To test the BarkCollar, you must replicate the vibration of a
dog's bark by rubbing a quarter or large coin along the top
of the Multi-Tool while it is set against the contact posts on
the receiver.
• Start by turning the BarkCollar dial
to Setting '4'.
• Place the Multi-Tool over the contact
posts on the receiver.
The DogWatch Logo should be on
top of the Multi-Tool, facing away
from the contacts.
• While holding the Multi-Tool on
the contact posts, rub the edge of
a quarter or large coin back and
forth over the top surface of the
• Multi-Tool
• The test light
illuminate when the collar
registers the vibration.
Reminder: Due to the 'bark forgiveness
delay', the test light will not illuminate
for at least 3 seconds.
1
for 10 seconds.
3
4
should
2
3
10
1
Multi-Tool
with test light
4
2