ASES Security DELTA Manuel - Sayfa 5

Kontrol Paneli ASES Security DELTA için çevrimiçi göz atın veya pdf Manuel indirin. ASES Security DELTA 8 sayfaları.

MAN REALS: This amber LED will glow when manual release switch is pressed to

release the gas.

ABORT: This amber LED will glow when abort switch is pressed to stop gas floating.

Disable: This amber LED will glow when disable switch is pressed to disable panels

operations.

GAS DISCHARGED: This amber LED will glow when the Gas in the cylinder starts

flowing through the discharge pipe.

SOV Operated: This amber LED will glow when timer counting is over and 24VDC

supply is on at SOV line.

SOV line open: This amber LED will glow when the continuity of the actuator valve line

is beaked.

CONTROLS:

RESET Key: This key is used to reset the entire system. While in reset condition, all

detector loop voltages are cut off up to 2 seconds for Detector and MCP become reset and

then voltages are put ON to the loop.

Note: We strongly recommend to avoid to do the RESET unless there is fire in the zone.

SILENCE Key: While in the faults condition, when it is pressed, the local buzzer will be

silenced. During in fire condition, the SILENCE Key press mutes the external hooters

and silence LED Glows.

LAMP TEST Key: As long as we are keeping this key in hold condition, all the LED's

will glow to identify whether all the LED's are in working condition or not.

AUTO/MANUAL LED: This toggle switch is used to select the operating mode of the

panel. By default AUTO mode is selected.

MANUAL RELEAS: This switch is used to release the gas manually in manual mode of

the panel only. There is no ABORT OR TIMER facility for release of the gas in manual

release mode.

ABORT: This switch is used to stop the Gas floating. When ever this switch is on, timer

will stop counting, gas discharge valve will not operate. This switch will turn off after the

panel is reset. Abort switch will not operate in manual operation mode of the panel.

DISABLE: This switch is used to disable the gas floating part of the panel. In this mode

the panel will only function as simple fire alarm control panel, i.e. sensors will sense fire

and the sounder will starts sounding, but no gas discharge section will activate.

ASES Security Pvt Ltd

437/2, Main Road, Mandwali Fazalpur, Delhi-110092

Page 5