ASG BLG-5000BC2-HT Operasyonel Kılavuz - Sayfa 7

Elektrikli Tornavida ASG BLG-5000BC2-HT için çevrimiçi göz atın veya pdf Operasyonel Kılavuz indirin. ASG BLG-5000BC2-HT 7 sayfaları. With built in screw counter, with built in screw counter and pulse system, for use with screw counter

Sayfayı Yazdır

Operation

Changing the Setting Mode

Press the F1 Button for more than 2 seconds in the normal mode. "P"

will be displayed in the function display section and the mode will be

changed to the setting mode.

Setting Mode

Pressing the F1 button allows you to scroll through each setup function.

Refer to "Setting Function List" for the setting function details.

(Count)

(Count Timer)

(Work Reset Timer)

(Reverse Count Timer)

(System Setting)

(Over Time/Short Time)

(Accumulated Counter)

Operation

Changing to Normal Mode

Press the F1 Button for more than 2 seconds in the setting mode. The

mode will be changed to the normal mode and the value set for the

count will be displayed.

Counter ON/OFF Setting

Each press of the F3 Button toggles ON and OFF. (Note: F2 Button is

not to be used.)

Value Setting for Each Function

Each press of the F2 Button in the setting mode changes the figure

position for setting.

ASG, Division of Jergens, Inc.

S. Waterloo Road | Cleveland, OH

15700

HIOS BLG-BC1 Series

Operational Manual

| Phone: (

44110-3898

888) 486-6163

Each press of the F3 Button increases the value one by one.

Note: The setting procedure is the same for all the settings

except for the "Counter ON/OFF Setting". Refer to "Setting

Function List" for the setting range.

| Fax: (

| Email: [email protected] | Web: www.asg-jergens.com

216) 481-4519