ASG BLG-OPC Operasyonel Kılavuz - Sayfa 8

Elektrikli Tornavida ASG BLG-OPC için çevrimiçi göz atın veya pdf Operasyonel Kılavuz indirin. ASG BLG-OPC 17 sayfaları.

Other Information

The count is to be returned
Pressing the F3 button for 2 seconds or more, resets
to the default value
the screw fastening count value.
during the screw fastening
operation.
If you fasten a screw
There may be some difference in results of motor
after the driver turns
revolutions after the driver turns counterclockwise as
counterclockwise:
the start position may have changed. In this case, the
start position needs to be reset by fastening a screw
before starting actual fastening again in order to avoid
errors.
"----" is shown on the
Once the cumulative usage count exceeds 1 million,
display.
"----" blinks on the display and the screwdriver is
locked. In such case, overhaul or maintenance is
required. Please contact ASG. Temporarily unlock the
screwdriver. Press and hold F2 and F3 buttons at the
same time.
To see the version of
Press and hold F1 button. Press F3 button (deactivate
screwdriver
screw-counter). Press and hold F1. The current version
will be displayed following the "HIOS" text. Activate
screw-counter if necessary.
BC2 Input/Output Cable
Please note the following points for use of the BC2 I/O Cable for
BLG-BC2.
1. The cable has a loop near its jack plug to reduce tension to
the cable.
2. Fix and tighten the BC2 I/O Cable in two spots with the
attached band along the driver cord.
3. Read all the instruction manuals enclosed with the products
and use them properly.
Install so hanger is on this side
Loop for reduction in ten-
sion to the cable
Ensure the cable mainte-
nance metal fittings are
mounted in the correct
location.
Ensure the jack is fully
plugged into the driver
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
HIOS BLG Series: BLG-BC2
Operational Manual
Screwdriver Cord
Band: Tighten the cable
properly
Fix with driver cable and secure
the Input/Output Cable
| Phone: (
44110-3898
888) 486-6163
| Fax: (
| Email: asginfo@asg-jergens.com | Web: www.asg-jergens.com
216) 481-4519