Doherty SCR01/WHITE Kullanım Kılavuzu - Sayfa 9

Tıbbi Ekipman Doherty SCR01/WHITE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Doherty SCR01/WHITE 12 sayfaları. Panel screen

9. Repeat stages 5-8 for the remaining panels, noting the panel order to assemble

in figure 3. There are 2 types of clip arrangement, this is necessary as each panel

must be rotated 180° to its neighbour, as shown below. Turn the panels round

so that panels 1 and 4 have distance 'A' between the edge of the frame and centre

of the screw and panels 2 and 3 have distance B.

Fig 5: Panel orientation

10. If the panel(s) appear slightly bowed once installed, slacken the top screws slightly

and pull the panel upwards, while holding retighten the screws, the panel should

now be flat.

11. The castor tubes must now be rotated into position:

• Using the spanner provided with the screen frame (not the panel kit), loosen the

nuts on the castor tubes.

• Turn the castor tubes through 90°.

• Pressing the bolt downwards towards the tube, re-tighten the nut. Tightening

fully may require the use of a 10mm socket and ratchet. Once tight ensure both

saddle clamps are seated correctly.

Fig 6: Orientating the castors

12. Your screen is now fully assembled. Carefully lift the screen onto its castors, this

may be easier if two able bodied people lift the screen together.

Please dispose of the packaging in a sensible and environmental fashion.