ASG TLB-PS61 Kullanım Kılavuzu - Sayfa 2
Güç Kaynağı ASG TLB-PS61 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ASG TLB-PS61 5 sayfaları.
Sayfayı Yazdır
General Safety Rules
Electrical Safety
•
Keep work area clean and well lit.
•
Power supply plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) electric screwdrivers. These
precautions will reduce the risk of electric shock.
•
Do not expose electric screwdriver to rain or wet conditions as this will increase
the risk of electric shock.
•
Never use the cord to carry, pull, or unplug the electric screwdriver. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
•
Do not operate power tools in explosive atmosphere, such as in the presence of
flammable liquids, gases or dust.
•
Keep children and bystanders away while operating a power tool. Distractions can
cause the operator to lose control.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of cord suitable for outdoor use reduces the risk of electric shock.
Personal Safety
•
Stay alert and pay attention to your surroundings when operating an electric
screwdriver with power supply. Do not use while you are tired or under the
influence of drugs, alcohol, or medication, as this could result in serious personal
injury.
•
Use safety equipment. Always wear eye protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
44110-3898
| Phone: (
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com | Revision Date: 01/03/18
888) 486-6163
216) 481-4519
General Safety Rules (Continued)
•
Ensure the switch is in the off position before plugging in to avoid accidental
starting.
•
Remove any adjusting keys or wrench before turning the power tool on.
•
Dress properly. Do not wear loose clothing or jewelery. Keep your hair, clothing,
and gloves away from moving parts.
•
Keep proper footing and balance at all times.
Power Supply Use and Care
•
Use the correct electric screwdriver and power supply for your application.
•
Do not use power supply if the switch is broken.
•
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the electric screwdriver. Such preventive safety
measures reduce the risk of starting the electric screwdriver accidentally.
•
Keep out of reach of children and untrained personnel.
•
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use.
•
Keep cutting tools sharp and clean.
•
Use the power tools, accessories, tool bits, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool.
Service
•
Have your electric screwdriver serviced by ASG. This will ensure that the safety and
quality of the electric screwdriver is maintained.
2