CYP CHDBT-1H7CPL Kullanım Kılavuzu - Sayfa 8
Medya Dönüştürücü CYP CHDBT-1H7CPL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CHDBT-1H7CPL 16 sayfaları. 1 by 8 hdmi over hdmi & cat5e/6/7 splitter
Sayfayı Yazdır6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
SYNC
1
2
1
POWER LED: Once the power supply is connected the LED will
illuminate.
2
SYNC: This LED will illuminate when the HDMI input port connected
to an active source.
3
HDMI LINK: This LED will illuminate when HDMI output is connected
to TV or display monitor.
LINK 1~7: The link LED will illuminate when both the input source
4
and output display signals are connected through CAT cable.
6.2 Rear Panel
HDMI IN
HDMI OUT
1
2
1
HDMI IN: Connect with source equipment such as DVD/Blu-ray or
PS3 player.
2
HDMI OUT: Connect to HDMI display for instant image display or
cascade with another family type Transmitter.
3
CAT5e/6/7 OUT 1~7: Connect these ports to CAT5e/6/7 to HDMI
Receivers with CAT5e/6/7 cable to extend the signal up to 60m.
4
IR IN: Connect with IR Extender to receive IR signal from Transmitter
side and blast out at Receiver side. Ensure that remote controller
being used is within the direct line-of-sight of the IR Extender.
5
IR OUT: Connect with IR Blaster to blast out the IR signal received
from the Receiver side. Place the IR Blaster in direct line-of-sight of
the equipment to be controlled.
3
HDMI
LINK
LINK 1
LINK 2
LINK 3
3
CAT5e / 6 / 7 OUT
1
2
3
4
3
CAT5e / 6 / 7 OUT
LINK 4
LINK 5
LINK 6
LINK 7
4
5
6
7
IR IN
IR OUT
DC 24V
EDID
SERVICE
STD
TV
4 5
6 7 8