ASGCO U-Scrape Kurulum, Çalıştırma ve Bakım Talimatı - Sayfa 2

Endüstriyel Ekipmanlar ASGCO U-Scrape için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Bakım Talimatı indirin. ASGCO U-Scrape 7 sayfaları. With bolt-up tensioner system

Sayfayı Yazdır

SAFETY FIRST

Important

Safety

Notice

WARNING

Please completely read and understand these instructions before attempting the installation of the belt

cleaning system. Failure to do so could lead to serious injury and equipment damage. Ensure that all

controls and power sources to the conveyor system are properly disconnected and locked out while in-

stalling, adjusting or maintaining the belt cleaning system. Never attempt any installation, adjustment,

or service procedure while the conveyor is in operation.

Ensure that all required safety equipment is on hand, such as a fire extinguisher and first-aid kit before

proceeding. Those who use and maintain the belt cleaning system must be properly trained in its

proper use, know of its dangers, and read and understand this entire manual before attempting to

install, operate, or service this device. Failure to observe all instructions could result in serious injury.

It is the owner's responsibility that the owner and each operator read and be familiar with this manual.

Please contact our ASGCO engineering Department at 1.800.344.4000 if you have further questions or

are unsure of these procedures.

Always observe the basic rules of safety when working

with any conveyor system. To avoid injury and equipment

damage, be sure that all controls to the conveyor are

locked out and the power source is disconnected at all

times during installation.