CYP CPT-380 Kullanım Kılavuzu - Sayfa 4

Medya Dönüştürücü CYP CPT-380 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CPT-380 11 sayfaları. Pc to video converter

Sayfayı Yazdır

Operation Controls and Functions

Remote controls and Functions

1. Power: Power ON/Off.

2. Video setting adjustments for picture,contrast, bright,

color and sharpness.

3. V-Reset: Press the button to reset picture adjustment 2

to factory default vaule.

4. NTSC/PAL: Press the button to select NTSC or PAL

as video output.

5. Color bar pattern ON/Off:

Press the button to show color bar pattern on the

screen. Press again to close color bar.

6. Image freeze ON/Off: Press the button to freeze/

unfreeze an image.

7. Output format: Press the button to select your desired

output format.

Press repeatedly to toggle through CV/SV

8. Under/Over Scan: Press the button to choose a

underscan image or overscan image.

9. 9-blocks selection(Zoom): Under zoom mode press one

of the buttons to select its corresponding sub-area which

is 1/9 of of the full screen.

10. Zoom ON/Off: Press the button to zoom in an picture, press again to zoom out.

11. Horizontal/Vertical adjust knob:

- Adjust the size or position of a image when it is under Zoom, Pan/Position, or

Size/EXP mode.

- Adjust setting value of picture adjustment in 2 .

12. Default: Press the button to revert the following parameters to factory preset value:

- Zoom

- Position

- Size

- Picture adjust

13. Pos/Pan: When a picture is in underscan mode, press the button to do position

adjustment. When a picture is in overscan mode,press the button to do

pan adjustment.

14. System reset: Press the button to revert all system parameters back to factory

- Overscan

- NTSC output

- 4:3 aspect

- Normal brightness

- Video settings reset, position/ pan/size /expand reset.

15. Size/EXP: When a picture is in underscan mode, press the button to do size

adjustment. When a picture is in overscan mode, press the button to do

expand adjustment.

16. Aspect: Press the button to switch between standard 4:3 and widescreen 16:9 aspect ratio.

preset value.

The system parameters are default as follows:

RGB

YUV

OUTPUT