Doka 588675000 Orijinal Kullanım Talimatları - Sayfa 8

İnşaat Ekipmanları Doka 588675000 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. Doka 588675000 18 sayfaları.

Sayfayı Yazdır
Repositioning operation, Framax
stripping cylinder I
Repositioning operation for stripping
➤
Remove the Connecting pin 10cm.
➤
Retract the stripping cylinder and lift it clear.
Equip each stripping corner with a separate
adapter.
This simplifies the repositioning operation of
the stripping cylinder and enables the stripping
corner to be fixed in the stripped condition.
➤
Mount the stripping cylinder on the next stripping cor-
ner.
➤
Insert Connecting pin 10cm into the stripping cylin-
der and the adapter and secure with Spring cotter
5mm.
Note:
If work is to be interrupted for a lengthy period of time,
the stripping corner has to be additionally secured
against sinking of the formwork with the Fixing unit for
Framax-stripping corner I.
Fixing unit for Framax stripping corner I
C
A
B
A Spindle tube
B Spindle nut
C Pegging tube
8
Original Operating Instructions Framax stripping corner I hydraulic
Mounting the Fixing unit for Framax
stripping corner I
➤
➤
➤
A Spindle tube
B Spindle nut
C Pegging tube
D Adapter for Framax stripping corner I
E Centring stud of stripping corner
➤
➤
➤
9239-209-01
D Spindle nut
E Pegging tube
F Connecting pin 10cm
G Spring cotter 5mm
Remove the pegging tube from the fixing unit.
Place the spindle tube on the centring stud of the
stripping corner.
Twist the spindle tube clockwise until fully engaged.
D
A
B
9239-211-01
E
Push the pegging tube over the thread of the spindle
tube.
Insert Connecting pin 10cm through the pegging
tube and the Adapter for Framax stripping corner I
and secure with Spring cotter 5mm.
Tighten the spindle nut against the pegging tube.
C
9239-212-02
999239002 - 07/2018
A
9239-212-01
F
G
C
B
9239-212-03