Doka Shifting trolley DF Orijinal Kullanım Talimatları - Sayfa 4
Endüstriyel Ekipmanlar Doka Shifting trolley DF için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. Doka Shifting trolley DF 14 sayfaları.
Maintenance & inspection
▪
Repairs may only be carried out by the manufac-
turer!
▪
Doka accepts no liability for products that have been
altered!
After taking delivery of the Shifting
trolley DF
Damage in transit
The Shifting trolley DF is given thorough inspection and
testing before being dispatched from the manufac-
turer's factory. In order to make sure that no damage
has occurred in transit, the Shifting trolley DF should be
inspected thoroughly as soon as it is delivered. Any
damage must be reported to the sender in writing. Until
this notice of defect has been dealt with, the Shifting
trolley DF may not be put into service.
Warranty conditions
The warranty shall lapse in the event of overloading or
other improper use of the equipment.
Before starting up at a new site
▪
Lubricate with grease via the lubricating nipples pro-
vided.
- on the guide mechanisms, 2x on the inside and
2x on the outside
- on the swivel casters (roller bearings and live
ring)
▪
Lubricate the load chain and the deflection pulleys
with lubricating grease.
Once a year, when lubricating the chain, inspect it care-
fully for any signs of alteration and damage.
4
Original Operating Instructions Shifting trolley DF
Before every use
➤
Check for any signs of damage or visible deforma-
tion.
Any deformed and damaged parts must be
immediately replaced by an expert. For
safety reasons, only genuine OEM spares
may be used.
▪
Crack-free and notch-free welds.
▪
No deformation.
▪
Rating plate must be in place and clearly
legible
At regular intervals
▪
Inspection of lifting accessories must be performed
at regular intervals by an expert in conformity with
national statutory provisions.
Unless otherwise stipulated, such inspection must
be carried out at least once a year.
Cleaning & maintenance
Clean the Shifting trolley DF whenever it has been
made dirty, paying particular attention to:
▪
the hydraulic system
▪
the moving parts of the guide mechanisms
▪
the bearing surfaces of the supporting frame
▪
the swivel casters
999216002 - 02/2020