Doka Staxo 40 Orijinal Kullanım Talimatları - Sayfa 4
Güvenlik Sensörleri Doka Staxo 40 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. Doka Staxo 40 5 sayfaları. Shifting wheel
Sayfayı YazdırPreparations on the shifting-wheels
Adjust the shifting-wheels to the Staxo 40 frames
of the bottom "storey" of the tower:
➤
Fix the adjusting bracket in the required position
using a D16/125 bolt, and secure this with a linch pin.
D
92848-200-03
D Adjusting bracket
E D16/125 bolt
F Linch pin
Position of the adjusting bracket for:
▪
0.90m frames
▪
upside-down 1.80m frames
4
F
E
▪
1.20m frames
▪
1.80m frames
Original Operating Instructions Staxo 40 shifting wheel
Mounting the shifting-wheels to the load-
bearing tower
➤
Bolt the shifting-wheel onto the Staxo 40 frame (in
the direction of the frames) with two D16/125 bolts,
and secure each of these with a linch pin.
G
E
F
E
G
F
92848-201-01
E D16/125 bolt
F Linch pin
G Fixing positions in the Staxo 40 frame
Wheeling
Raising the load-bearing tower
➤
Use the screwjack mechanism on the shifting-wheel
to raise the load-bearing tower max. 5 cm off the
ground.
b ... max. 5 cm
H Handle of the shifting-wheel screwjack mechanism
Quick lowering of the swivel castor:
1)
Open the split nut of the shifting-wheel by
releasing its integrated quick-locking
device.
The screwjack mechanism plus swivel
caster are now lowered to the ground.
2)
Close the split nut again and fix it with the
quick-locking device.
999284802 - 08/2018
92848-200-01
H
92848-203-02