CYP SY-P290 Kullanım Kılavuzu - Sayfa 7
Medya Dönüştürücü CYP SY-P290 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP SY-P290 10 sayfaları. Pc/dvi to hdmi converter
Ayrıca CYP SY-P290 için: Kullanım Kılavuzu (10 sayfalar), Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
6.2 Rear Panel
1
1. Coaxial input: Connect the coaxial audio output of the source device to this
input.
2. L/R audio input (3.5mm): Connect the L/R audio from the source device to this
input.
3. HDMI output: Connect to your displays hdmi input
4. Audio input Select button: Press the button to access the menu and select
which audio input (Coaxial or L/R) you want to transfer to the HDMI output.
5. Video Input Select button: Press the button to access the menu and select
between the DVI or PC/HD video as the input source.
6. Output Timing button : Press this button to access the menu and select 720p /
1080p / XGA /UXGA as the output resolution.
Notes:
• Only when HDMI signal is send the selection of audio under HDMI will appear
on the display and the audio will support PCM 2ch.
• Press the 'audio' and 'video' buttons simultaneously to set the output to XGA.
• Press the 'audio' and 'timing' buttons simultaneously to set the output to 720p.
AUDIO IN
COAXIAL
L/R
2
HDMI
INPUT
OUT
AUDIO VIDEO TIMING
3
4
5
Page 4
OUTPUT
6