CYP CMSI-4H4CVL Kullanım Kılavuzu - Sayfa 14

Matris Anahtarlayıcı CYP CMSI-4H4CVL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CMSI-4H4CVL 20 sayfaları. Hdbaset 4×4 hdmi matrix over cat5e/6/7

Sayfayı Yazdır

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are case-insensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.