ASHBY 7900-43 Hızlı Başlangıç Kılavuzu - Sayfa 9
İç Mekan Mobilyaları ASHBY 7900-43 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ASHBY 7900-43 10 sayfaları. 135cm & 150cm bedstead
Sayfayı YazdırCare and Maintenance
Wood Furniture
Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which
can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of
the wood.
Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on some surfaces, such as table tops and drawer
fronts by the way slivers are arranged.
All timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in shade
from items that have been previously purchased.
How to care for your wood furniture
Dust with a clean, damp, lint free cloth. Frequent dusting will remove abrasive build up, which can damage the finish
over time.
Do not use a very wet cloth or allow any liquid to contact with the veneers for a long period of time as this can
permanently damage the surface. Wipe up spills immediately.
Do not use any abrasive cleaner or harsh detergent as this can damage the surface of the furniture.
Spray polishes are best avoided as they contain silicones which may spoil the furniture's surface when building up
over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters.
Ensure that a mat or pad is placed under paper when you are writing on the furniture surface.
Do not place rubber or plastic materials on the wood finish as chemicals within may react with the finish if left in
contact for an extended period of time.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home
heating can cause damage such as warping, cracking or splitting.
Excessive exposure to sunlight can cause fading of your furniture.
Safety Instructions:
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose. Re-tighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly assembled. Assembly should be carried out by a competent person.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Heavy item warning:
It is recommended to seek assistance when moving a heavy object. Take care when lifting to avoid personal
injury and (or) damage to the product.
It is recommended that before moving a heavy object to a new location it is completely dis-assembled to
avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
Page : 9
IW- 1 7-7900-524/525-0