DOL 41R Teknik Kullanım Kılavuzu - Sayfa 3
Aksesuarlar DOL 41R için çevrimiçi göz atın veya pdf Teknik Kullanım Kılavuzu indirin. DOL 41R 4 sayfaları. Capacitive relay-sensor
Sayfayı Yazdır
4 User Guide
Sensor
Red
No time delay
Delayed
Red
disconnection
Red
Delayed
connection
The sensitivity and the delay length are adjusted by two switches. LEDs indicate when the switches are acti-
vated.
Green-0.2 mm
+1 min
Red
Yellow
DOL 40R
Activated
DOL 41R has no time delay.
Not active
DOL 43R has an option for delayed disconnection. Time delay
starts When the activation stops (red flash) When this time stops,
the relay switches back.
DOL 45R has Apart from the settings mentioned above, also has
Green
the option of delayed connection. The time delay starts when the
sensor is affected. When the delay period runs out, the relay will
switch. The relay does not switch back until the activation stops.
Green
Green
Sensitivity adjustment (DOL 41R / 43R / 45R)
+0.2 mm
press 1 x A+B simultaneously
press A or B for -0,2mm +0,2mm
DOL 41R settings is completed press A+B
DOL 43R and DOL 45R continue to the next setting by press A+B
Time delay setting (DOL 43R/45R)
+1 sec.
Press A or B for +1 minute +1 seconds
Eksempel 1xA + 5xB = 65 seconds
DOL 43R settings is completed press A+B
DOL 45R continue to the next setting by press A+B
On / off delay (DOL 45R)
On
Off
press A or B for delayed on or off
press A+B simultaneously = settings completed
Status
Red: sensor is affected
Green: sensor is unaffected
Yellow: Error
Flash: T ime delay
Special functions
Factory setting: Hold A + B simultaneously for 15 seconds
Show delay Hold A + press 2xB (Red = 1 min. Green = 1 sek.)
Change delay: Hold A + press 4xB (+10 sec.) hold A + 5+B (÷5 sec.)
Hold A + 6+B (+1 hour.)
Switch off delay.: Hold A + press 7xB
switch off LED Hold A + 8xB
Switch on LED Hold A + 9xB
Sensitivity
Delayed disconnection Delayed connection
DOL
41R
43R
45R
www.dol-sensors.com
Technical User Guide
3