CYP CMSI-424E Kullanım Kılavuzu - Sayfa 8

Anahtar CYP CMSI-424E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CMSI-424E 20 sayfaları. Hdbaset 4×4 hdmi matrix over 4 cat5e/6/7 with 2 hdmi outputs

Sayfayı Yazdır

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CMSI-424E

4X4 HDMI MATRIX

LCM : Displays the setting information of each input and output

setting.

IR Window: IR Receiver window (accepts the remote control signal

of this device only).

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate when locked.

MENU: Press once to select EDID setting from STD (internal) 1 or TV

(external) 2 then press it again to confirm the selection. Press the

the 'MENU' button to confirm the input or output selection

IN/OUT and 1~4/A~D: Press the OUT button and then the number

buttons to select the required output ports, and press IN button

and then a single number button to select the required input

source, finally press the MENU button to confirm the selection.

For example, if outputs A~B need to be set to input 1 and outputs

C~D need to be set to input 2, then the following sequence of

button presses need to be performed:

Press: OUTABIN1→MENU,

and then press: OUTCDIN2MENU.

Note: If the menu button is not pressed the selection will not be

changed.

POWER

LOCK

OUT