CYP CPRO-3D42S Kullanım Kılavuzu - Sayfa 7

Anahtar CYP CPRO-3D42S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CPRO-3D42S 14 sayfaları. 4 by 2 hdmi switcher with heac
Ayrıca CYP CPRO-3D42S için: Kullanım Kılavuzu (12 sayfalar)

Sayfayı Yazdır
CYP CPRO-3D42S Kullanım Kılavuzu

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1
1
IR Remote Control Sensor
2
Audio/3D Content Indicator
The system will automatically detect incoming audio/video signal
type and the green LEDs will illuminate accordingly.
Input Selection
3
Press input button to select input source, the Blue LED will illuminate
accordingly. If none of the LEDs are illuminated then no input
has been selected, this is to allow the device to access the ARC
feature alone.
4
EDID Selection
The EDID control button selects
between using the EDID from the
display attached to Output 1/TV or
using the onboard EDID/STD (the
Green LED will illuminate accordingly).
When the EDID button is pressed for
longer then 3 seconds, the RED LED will
illuminate to indicate that the EDID is already locked to STD or TV
EDID as you selected accordingly. When EDID is set on STD audio
will support PCM 2CH, video modes supported are listed in the
table above.
5
Power Button
Press this button to switch on the device or press it again to set it to
standby mode.
3
BITSTREAM
LPCM 5.1/7.1
2CH
3D
2
STD
1
2
3
4
INPUT
3
RGB
Y444
Y422
XvYCC
TV
LOCK
EDID
POWER
4
5
8
10
12