CYP CPRO-41W Kullanım Kılavuzu - Sayfa 9

Anahtar CYP CPRO-41W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CPRO-41W 16 sayfaları. 4 by 1 hdmi switcher with audio return channel

Sayfayı Yazdır

Note

A. This system was tested with 24AWG cables if using cables of another

type, the performance of this system may vary.

B. Cable distance tested with a PS3 & 40" Samsung LED LCD TV.

C. Figures provided in this manual are for reference only, actual figures

may depend on the source and display used along with the cables

specifications.

7.3 Top Panel

DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor

to an AC outlet. The LED will switch on when the power cable is plugged in.

USB 5V: This slot is where you can connect the mini USB cable from your PC

to supply power.

Note: Power supply only support either DC5V or mini USB power.

RS-232: This slot is to connect with a PC or control system with D-Sub 9pin

cable for RS-232 control. For detailed RS-232 commands please refer to

section 9.

COAX OUT: This slot is where you connect an amplifier for sending an audio

signal with coaxial cables. When audio return function is on the audio

signal will be received from the output end and when the audio return

function is OFF the audio signal will be received from the input source. This

device supports PCM 2CH and AC3.

Note:

A. The display TV or monitor must support an audio return function and the

function be must turned on in order to perform properly.

B. The display TV or monitor's HDMI input jack must connected to the one

with an audio return function.

①

②

③

④