Dolby Laboratories DP591 Hızlı Başlangıç Kılavuzu - Sayfa 14
Medya Dönüştürücü Dolby Laboratories DP591 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dolby Laboratories DP591 19 sayfaları. Object authoring tool
Ayrıca Dolby Laboratories DP591 için: Hızlı Başlangıç Kılavuzu (9 sayfalar)
Sayfayı Yazdır
4.5.2 Creating target device configurations
Using different device targets for a presentation requires configurations for each type of
device.
About this task
A broadcast presentation may have to address different types of target devices for
reception. Those devices can include TVs or set-top boxes with stereo, 5.1, or Dolby Atmos
capability. For each presentation, you can create target device configurations with dynamic
objects and settings that are intended for any of those devices, to accommodate different
speaker layouts.
Procedure
1. Select a presentation.
2. From the target device drop-down list (below the presentation tabs), select the type of
output you want to configure.
For example, if you want to deliver a stereo experience with a different setting than a 5.1
experience that you have already designated, select the Stereo option.
Figure 6: Target device list
3. Make any changes to the dynamic object settings that you want to be part of the device
configuration.
For example, move the dynamic object from one speaker position to another that you
want to emphasize for this presentation.
4. Click Save.
4.5.3 Setting speaker configuration
Speaker configuration allows you to choose the number of Dolby Atmos speakers used for
monitoring the unit output.
Procedure
1. To choose the number of speakers, go to Settings>Speaker Configuration.
2. From the Dolby Atmos Speaker Configuration drop-down list, select the desired number
of speakers.
3. Click OK.
Dolby DP590 object authoring tool quick-start guide
24 June 2016
4.5 Enabling dynamic objects for presentations
14