Dolby Laboratories CP750 Kurulum Kılavuzu - Sayfa 17
Bilgisayar Donanımı Dolby Laboratories CP750 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dolby Laboratories CP750 19 sayfaları. 7.1 audio for the dolby multichannel amplifier
Sayfayı Yazdır
- 1. Introduction to Dolby Cp750 7.1 Audio for the Dolby Multichannel Amplifier
- 2. About the Cp750 (or Other Cinema Processor) Configuration for the
- 3. Connecting a Cp750 (or Other Sound Processor) to a Media Block
- 4. Configuring Advanced Connections
- 5. Cp750 Audio Output Cable Pinouts
- 6. To 25-Pin D-Connector Digital Audio Pinouts
2. Note the IDs of the Yamaha devices.
3. Launch the Dante Controller or R-Remote software on your computer.
The ID for the correct unit appears at the top right side of the Dante Controller or R-Remote
screen, as shown in the following figures. (In these examples, 11a1da is the ID.) This ID
identifies the Yamaha device that you need to select in the Dolby Multichannel Amplifier
Network > Dolby Atmos Connect > Available Sessions screen.
Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual
7 May 2018 Issue 1
Setting up the system
17