CYP CH-507TX Kullanım Kılavuzu - Sayfa 10
Alıcı CYP CH-507TX için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CH-507TX 16 sayfaları. Hdmi over cat5e/6/7 transmitter and receiver
Ayrıca CYP CH-507TX için: Kullanım Kılavuzu (11 sayfalar), Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
6.2 Receiver Front and Rear Panels
Front
HDMI Out
1
2
HDMI Out
1
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.
LAN
2
Connect to a PC or Laptop to the Internet or network connection.
RS-232 Out
3
Connect to the device that is to be controlled (via D-Sub 9 pin
female cable) by RS-232 commands.
Power LED
4
This blue LED will illuminate when the device is connected to a
power supply.
IR 2 Blaster
5
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be
controlled.
IR 1 Extender
6
Connect to the supplied IR receiver cables for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
7
Link LED
The yellow LED will illuminate when both the input and output
signals are connected.
8
CAT5e/6 In
Connect to the transmitter unit with a Single CAT5e/6 cable for
tranmission of all data signals.
5
Receiver
RS-232 Out
CAT5e/6 to HDMI with LAN/IR/RS232
3
Rear
IR2 Blaster
Power
IR1 Extender
5
4
6
7
8